small |
Production of the +z side of the carbon fibre end flange : The balconies
are mounted on the mounting plate and will be glued to the carbon fibre
plate (19.9.2000) |
small |
Glueing of the balconies to the carbon fibre endplate. The glue flows
into the slit by capillary forces. |
small |
Rohacell fillers are glued to the carbon fibre plate (22.9.2000) |
small |
The first cooling box has been installed |
small |
The top carbon plate and the pieces that position the halves relative
to each other have been glued to the end flages (28.9.2000) |
small |
The +z side endring prints, viewed from "outside" |
small |
The -z side endring prints, viewed from "outside", already mounted
to the end flange |
|
|
Mounting the Elliptical CST for
the First Time: 26.10.2000 |
small |
The last picture of the old CST (bottom half). RIP... |
small |
Silvan Streuli dismounts the old CST. |
small |
The inner layer is being removed. |
small |
The elliptical end flanges are equipped with dummy ladders. |
small |
Halfway through the mounting of the outer layer. The paper strips help
to fiddle the capton cables through the small slits in the carbon fibre
end flange. |
small |
The outer layer has been assembled |
small |
It's cute, isn't it? |