Global parameters (flags, switchers) used to setup reconstruction
program.
FNCRec program have access to this parameters
via GIPar(ParN), GFPar(ParN) array, filled in fn2mdb
subroutine
Here is translation for used parameters:
GIPar(1) | 255 | Internal usage |
GIPar(2) | -- | Not Used |
GIPar(3) | -- | Not Used |
GIPar(4) | 0/1 | Switch between methods of coordinates calculation in MainCalo. |
GIPar(5) | 0/1 | Switch between methods of coordinates
calculation in Preshower. 0 - log.correction 1 - sin.correction |
GIPar(6) | 0/1 | MC only: Switch off/on cells noise. In development |
GIPar(9) | 0/1 | Data and MC: apply (0=no/1=yes) symmetric cut on cell
energy (cut value defined by Par3 parameter from FN1G bank) |
GFPar(1) | -- | Not Used |
GFPar(2) | 0.94 | Scale factor for Preshower |
GFPar(3) | -- | Not Used |
GFPar(4) | 0.94 | Scale factor for MainCalo |
GFPar(5) | 6 | Critical clasters link distance. (To set up corresponding quality bit) |
GFPar(6) | 0.5 | Critical value of CorEne estimator. (To set up corresponding quality bit) |